Power Queen 30A Smart Solar Charge MPPT Controller Regulator Bluetooth 12V 24V

Description

【12/24V MPPT with 99% Tracking Efficiency】
Given Innovation MPPT technology's high tracking efficiency of up to 99% and peak conversion efficiency of 98%, the Power Queen MPPT Charge Controller can track arrays' maximum power point to get the most power to charge the battery and loads. It improves the energy utilization ratio by 15%-20% when compared to conventional PWM controllers.
【Intuitive LCD Display & Remote Monitoring】
The Power Queen MPPT Controller includes the LCD screen and multiple LED indicators, and it’s intended to display information about system operation, customizable parameters, and error codes. It includes a Bluetooth adaptor with an RJ12 port and can be used with the integrated RS232 communication protocol to remotely monitor the real-time status of the solar panel, battery, and loads.
【LiFePO4 Default Setting & Widely Use Range】
The Power Queen 12/24V 30 Amp MPPT Charge Controller was conceived in response to the widespread demand from lithium battery users for a dedicated LiFePO4 battery controller. It's intended for LiFePO4 batteries, with a 12V LiFePO4 default setting, but it's also adaptable to Gel, Sealed, Flooded, and Lead-Acid batteries by manually setting.
【Solid Case Design & Built-in Multiple Protections】
The utilization of a die-cast aluminum heat sink increases heat dissipation efficiency, which reduces power loss due to heat. And it can operate at full load in temperatures ranging from -31°F to 113°F. Over-voltage, over-power, short-circuit, reverse-connection, reverse-charging, and over-temperature protection are all built in, ensuring total protection from the solar panels to the load terminal.
【Complete Accessories Are Available in One Package】
Power Queen MPPT Charge Controller provides the most comprehensive installing accessories for setting up a solar charge system. It saves you time in searching for the right accessories, allows you completing the installation when you receive the package and getting ready for the solar power system.
【U.S. Based warehouses & 24hrs Timely Service】
Power Queen backs up its 12/24V 30A MPPT Charge Controller with a 3-year warranty. Customers in United Stated are expected to receive the battery within 2~7 working days due to our local warehouse in CA, TX and GA. We provide a strong controller package, quick delivery as well as 24 hours timely customer support.
Specification:
Model :   PQ2430
Rated Charging Current :   30A
System Voltage:    12V(Default) / 24V / Auto
Rated Load Current:    20A
Battery Voltage:    9V to 35V
Operating Temperature:    -31°F to 113°F / -35°C to 45°C
Max. Power Point Voltage Range :   Battery Voltage +2V to 75V
Conversion Efficiency:    ≥98%
Max. Solar Input Voltage :   100V(77°F / 25°C) / 90V(-13° F / -25°C)
MPPT Tracking Efficiency :   ＞99%
Max. Solar Panel System Input Power:    400W for 12V / 800W for 24V
Communication Method:    RS232
Temperature Compensation Factor:    -3mv/°F or °C / 2V (Default)
Weight:    4.41lb / 2kg
Temperature Sensor:     Yes (Only for Lead-Acid battery)
Dimensions    L6.81*W2.85*H9.37inch/L173*W72.5*H238mm
Model (Bluetooth Adapter)    PQ BT-1
Input Voltage :     5V-12V
Stand-by Power Consumption:      0.04W
Run Power Consumption:      0.05W
Communication Distance:      ＜=15m
Interface Type:      RJ12
Installation Hole Diameter :     φ9/64inch / φ3.5mm
Protection Degree :     IP67
Operating Temperature:      -4°F to 167°F / -20°C to 75°C
Weight :     0.2lbs / 0.12kg
Dimension :     L2.61*W0.59*H2.07inch/L66.3*W15*H51mm
Package Included:
Power Queen 30A MPPT Charge Controller*1
Remote Temperature Sensor (for Lead-Acid battery)*1
Mounting Brackets*4
Mounting Screws*12
Copper Wire Connector*6
Heat Shrink Tubing for cable*6
Installation Guide*1
User Manual*1
Bluetooth Module *1
Expansion Tube*4
QA
1.    Does the solar charge controller come with the Bluetooth adaptor?
Yes, the Bluetooth adaptor is included; connect it to the RS232 communication protocol to enable remote monitoring from your mobile device via an app.
2.    Can the MPPT controller charge cable be connected in parallel / series to meet high power charging requirements?
Yes, the Power Queen MPPT controller can be connected in parallel to increase charging current for a single unit battery or a battery bank. But it's not able to be connected in series.
3.    Can I connect the controller to my 12v/24v solar system?
Yes, the controller is suitable for both 12v and 24v systems; the 12V Li mode is the default setting; and it can automatically sense the system voltage once properly connected to a GEL, AGM, or Flooded battery bank. Before charging your lithium batteries, please set the parameters in accordance to the user manual first.
4.    Is there any suggestion on MPPT charge controller installation?
We strongly advise reading the manual before installing the Power Queen MPPT charge controller. We have created a detailed installation guide with instructions at each step; if you have any additional questions, please contact the Power Queen technical team.
On Dec 7, 2022 at 18:32:42 PST, seller added the following information: